01 Home 02 Start 03 Home Pro 04 Business Fibre 05 Contact
PACKAGE 01 / START

OPTIGATE Start

One flat, one clean fibre line, done in an afternoon. Designed for studios and 1–2 room apartments where you need a single, properly spliced connection point that actually delivers the speed you pay for.

2–3 hours on site
1–2 rooms
12 month warranty
HALL LIVING ROOM BEDROOM FIG. 02 — SINGLE LINE TOPOLOGY 30 M MAX STREET FUSION SPLICE ONT ROUTER SPEED VERIFIED CABLE RUN ≤ 30 M
FIG. 02 — SINGLE LINE1 POINT
FIXED PRICE
£425

Complete package. Materials, labour, configuration and documentation included — no hourly billing.

Request this package
  • Property typeFlat / studio
  • Rooms1–2
  • Time on site2–3 hours
  • Cable includedUp to 30 m
  • Connection points1
  • Warranty12 months
WHAT'S INCLUDED

Everything in the box.

Engineer visit & site survey

We check the building entry point, existing ducts and internal routes, then agree the cable path with you before touching a wall.

Up to 30 m of optical cable

Correct bend radius, secured at intervals, run in trunking or along skirting so the finish looks deliberate rather than improvised.

One connection point, spliced

Fusion splice, protected joint, ONT mounted and configured. Loss measured and recorded — not left to chance.

Router setup & speed protocol

Channels, bands and security configured, then throughput measured at the point of delivery and handed to you in writing.

WARRANTY

12 months on workmanship and supplied components

If a splice, termination or configuration we delivered fails within the first year, we come back and put it right at no charge.

ON THE DAY

Two to three hours, start to finish.

One engineer, one visit. You do not need to take the whole day off.

00:00

Arrival & walkthrough

We confirm the entry point, the route and where the ONT and router will live. Anything that needs moving gets moved now, not halfway through.

00:30

Cable run

Fibre pulled and secured along the agreed route, trunked where it is visible, with bend radius respected at every corner.

01:30

Splice & terminate

Fusion splice, protective sleeve, connector cleaned and inspected. ONT mounted, powered and registered.

02:15

Configure, measure, hand over

Router configured, throughput measured, protocol written, cables labelled, work area cleaned. You get a short walkthrough of what is where.

EXTEND IT

Popular add-ons for Start

Add-onPrice
Additional connection point£145
Each additional 10 m of cable£45
Mesh Wi-Fi node, supplied and installed£185
Concealed routing (chasing, raised floor)£245
Emergency call-out within 24 hours£95
FAQ

Start — the details.

For the vast majority of studios and one to two bedroom flats, yes — 30 m covers the run from the building entry point to a living room or hallway termination with slack to spare. If your route is longer, additional cable is £45 per 10 m and we tell you at survey stage, not at invoice stage.
Yes. Everything we install under Start is built to the same standard as Home Pro, so adding points, a patch panel or mesh nodes later is straightforward. We will credit the survey work if you upgrade within three months.
If you rent, or the run passes through communal areas, you will normally need written consent. We are happy to supply a route drawing and method statement to support the request — just ask when you book.
The speed protocol we hand over is measured at the delivery point, so you have hard evidence of what the installation delivers. If the number later drops and the cause is on our side of the line, the warranty covers a return visit. If the cause is your provider, the protocol is exactly what you need to prove it to them.
£425 · FIXED

Book OPTIGATE Start.

Send us the postcode and the number of rooms. We will confirm availability and a firm date.

Request a survey